operators_manual
Table Of Contents
- Safety
- Using this Manual
- Safety Alerts
- Illustrations
- General Safety Instructions
- Data Recorder
- Environmental Protection Agency
- Repairs
- Additional Sources of Information
- Cab Access
- How to Access the Upper Bunk
- Deckplate Access
- How to open the hood
- Seat
- What to do before starting the vehicle
- Vehicle Loading
- Visual inspection while approaching the vehicle
- Daily Checks
- Weekly Checks
- Systems Check
- Emergency
- Roadside Assistance
- Low Air Alarm
- Stop Engine Light
- Low Oil Pressure
- Engine is Overheating
- How to Inspect and Replace a Fuse
- Where are the Fuses Located?
- How to Jump Start a Battery
- How to Recover a Vehicle
- Manually Release the Parking Brake
- Recovery Hitch
- How to use a Recovery Hitch
- How to Prepare the Axles for Towing
- How to Manually Lock a Differential
- Recovery Hitch Capacities
- Best Practices for Recovery Rigging
- Returning to Service After Recovering
- What to do if the Vehicle is Stuck in Sand, Mud, Snow or Ice
- Towing the Vehicle
- Controls
- Instrument Cluster
- Peterbilt Digital Display Controls
- Peterbilt Digital Display
- Selecting a View
- Configure Settings
- Drive Summary
- Driver Rewards (option)
- Driver Performance Assistant (option)
- Bulb Check
- Guide to the Warning Symbols
- ADAS Camera Fault
- Axle, Stability Control (Option)
- Axle, Traction Control
- Brakes, Antilock Brake System
- Brake, Park Brake
- Brakes, Low Air
- Brakes, Trailer Antilock Brake System
- Cruise Control
- Differential, Inter-Axle Lock
- Dump Truck, Body Up
- Dump Truck, Gate
- Diesel Particulate Filter (DPF) Warning Light
- Emissions, High Exhaust System Temperature
- Emissions, Malfunction Indicator Light
- Engine, Check Engine
- Engine, Engine Block Heater
- Engine, Low Coolant Level
- Engine, Overspeed Air Shutdown
- Engine, Retarder (Brake)
- Engine, Stop Engine
- Engine Wait-to-Start Light
- Emissions, Engine Derate
- Fifth Wheel Slide Unlocked
- Fifth Wheel Locked
- Fifth Wheel Unlocked
- Lights, High Beam
- Lane Departure Warning (LDW)
- Lane Departure Warning (LDW) Fault
- Fast Idle Control
- Refrigerator
- Seat Belt Fasten
- Tire Inflation (TPMS)
- Transmission, Auxiliary
- Transmission, Check
- Turn Signal, Left
- Turn Signal, Right
- Optional Gauges
- Dash Switches
- Axle, Differential Lock - Tridrive
- Axle, Diff-Lock - Dual
- Axle, Diff-Lock - Forward Rear
- Axle, Diff-Lock - Rear Rear
- Axle, Diff-Lock - Single Rear
- Axle, Diff-Lock - Steer
- Axle, Inter-Axle Differential Locked (Tandem)
- Axle, Two Speed
- Back Up Alarm Mute
- Batteries, Low Voltage Disconnect (LVD)
- Brakes, ABS Off-Road
- Brakes, Parking Brake Valve
- Brake, Trailer Hand
- Cab Dimmer Switch
- Dump Truck Gate
- Engine, Fan Override
- Engine, Heater
- Engine, Remote Throttle
- Engine, Overspeed Air Shutdown (Manual)
- Engine, Overspeed Air Shutdown (Test)
- Engine, Under Hood Air Intake
- Exhaust, Diesel Particulate Filter (DPF) Regeneration
- Fifth Wheel Slide
- Fuel Heater
- Generic Air, Accessory
- Generic, Spare SPARE
- Ignition Key Switch
- Lane Departure Warning (LDW) Disable
- Lights, Automatic
- Lights, Auxiliary
- Lights, Beacon
- Lights, Daytime Running (Override)
- Lights, Dome
- lights, Exterior lights Self Test
- Lights, Flood
- Lights, Flood (Spare)
- Lights, Fog
- Lights, Hazard
- Lights, Headlight
- Lights, Marker/Clearance
- Lights, Marker/Clearance/Trailer
- Lights, Park Light
- Lights, Spot
- Mud and Snow Traction Control
- Pintle Hook
- Power Take-off (PTO)
- Power Take-off (PTO), Forward
- Power Take-off (PTO), Rear
- Suspension, Axle, Pusher
- Suspension, Axle, Tag
- Suspension, Dump
- Suspension, Air Retention
- Suspension, Third Axle Lift
- Trailer Air Supply
- Trailer, Axle (3rd Axle) Lift
- Trailer, Axle Lift Forward
- Trailer, Axle Lift Rear
- Trailer, Belly Dump
- Trailer, Dump Gate
- Trailer, Belly Dump Gate Center
- Trailer, Belly Dump Gate Front
- Trailer, Belly Dump Gate Rear
- Trailer, Hotline
- Trailer, Suspension Air Dump
- Transmission, Transfer Case
- Transmission, Transfer Case Two-Speed
- Winch Clutch
- Ignition Key Switch
- Exterior Lighting Self-Test
- Steering Column Controls
- Steering Wheel Controls
- Door Mounted Mirror Controls
- Heating and Air Conditioning
- Sleeper Alarm Clock
- Cab Accessories
- Driving
- Starting and Operating
- Starting and Warming Up
- Engine Operations
- Indicators around the speedometer
- Speed Limit
- Engine Brake Operation
- Engine Brake Operation for a Vehicle with Automated Transmission
- How to Deactivate MAX Mode
- Engine Brake Indicator
- How to change Fast Idle Control (FIC) Speed
- How to Start the PTO
- Engine Fan Control
- Using a Winterfront
- How to Set the Shutdown Timer
- Engine Aftertreatment System
- Driver Assistance
- Transmission
- Brakes
- Axle and Suspension
- Trailer Operations
- Driving Tips and Techniques
- What to Consider when using a Sleeper Bunk
- Stopping the Vehicle
- Maintenance
- New Vehicle Maintenance Schedule
- First Day
- First 50-100 mi / 80-160 km
- First 500 mi / 800 km
- First 2,000 mi / 3,218 km
- First 3,000-5,000 mi / 4,800-8,000 km
- Maintenance Schedule
- At first 15,000 mi / 24,000 km or at first PM
- Component Specific Intervals
- Every 15,000 mi / 24,000 km / Monthly
- Every 25,000 mi / 40,000 km / 6 Months
- Every 30,000 mi / 48,000 km
- Every 60,000 mi / 96,000 km / 6 Months
- Every 120,000 mi / 192,000 km / Annually
- Every 240,000 mi / 384,000 km
- Every 300,000 mi / 480,000 km / 6,750 Hours / 3 Years
- Every 500,000 mi / 800,000 km / 5 years
- Every 750,000 mi / 1,200,000 km/ 24,000 Hours / 8 years
- Lubricants
- Checking Oil Level
- Air System
- Dual Air System Function Test
- Air Dryer Maintenance
- Air Tanks
- Air Gauges and Air Leaks
- Air Compressor
- Brake System
- Cab Maintenance
- Cab Structure, Doors and Hoods
- Safety Restraint System - Inspection
- Cooling System Maintenance
- Electrical System
- Engine Aftertreatment System Power Requirements
- Low Voltage Disconnect (LVD) (option)
- How to Replace Headlight Bulbs
- Aiming Headlights
- Fuses, Circuit Breakers and Relays
- Altering the Electrical System
- Vehicle CAN Bus
- Batteries
- Under Cab Battery Access
- In Cab Battery Access
- Cranking Battery Specification
- Removing Batteries
- Installing Batteries
- Replace Battery Box Cover
- Slow Battery Charging
- Alternator
- Remote Keyless Entry
- Engine Maintenance
- Frame
- Fuel System
- Front Axle and Suspension
- Heater and Air Conditioner Maintenance
- Noise and Emission Control
- Diesel Exhaust Fluid (DEF) Tank Straps
- Rear Axle and Suspension
- Steering System
- Driveline
- Tires
- Wheels
- Windshield Wiper/Washer
- Transmission Maintenance
- Hydraulic Clutch
- Specification Reference Charts
- Information
- Index
Auto Neutral
Gear Display Icon (Auto Neutral)
AN
The Auto Neutral feature will automatically
shift to Neutral if the vehicle is left in
forward or reverse mode and the parking
brake is set. The driver must then select
the desired forward or reverse mode with
the service brake applied.
Neutral Coast Mode
Neutral Coast Mode allows the
transmission to disengage the driveline by
pulling out of gear on slight downhill
grades, where little to no engine power is
required, when the vehicle is in cruise
control and the transmission is in Drive
mode.
•
When Neutral Coast Mode is
active, the engine will drop to idle
speed and the transmission will
disengage.
• The gear display may flash a gear
number or indicate Neutral when
Neutral Coast Mode is active.
• If a flashing number is indicated in
the gear display, this represents the
gear that the transmission will
select when it is necessary to
engage a gear
.
• The transmission will exit Neutral
Coast Mode and reengage an
appropriate gear under any of the
following conditions:
• Vehicle brake is applied
• Driver depresses accelerator
pedal
• Cruise control is canceled
• A mode other than Drive is
selected
• Driver performs upshift/
downshift requests
• Cruise high or low set speeds
are exceeded
• Maximum vehicle grade is
exceeded
• Request by an adaptive cruise
system
Clutch Abuse Protection
The clutch can overheat and slip with
improper use.Select the lowest possible
start gear for the application.
•
If moving slowly is required, select
1st or R1.
• Use the Service Brake and let Hill
Start Aid assist you when
launching on an incline.
• Do NOT use the throttle to hold the
vehicle on an incline. (Use Service
Brake).
• Do NOT use the throttle to stop roll
back on an incline after Hill Start
Aid disengages. (Use Service
Brake and then relaunch).
Gear Display Icon (Clutch Abuse)
If the clutch does start to overheat, the
display will show “CA” along with a warning
tone. Full clutch actuation must be
completed quickly
. If not, the system will
either open the clutch if not on the throttle
or close the clutch if on the throttle. If the
abuse continues, the system will open the
clutch and take away throttle control for a
short period of time to allow the clutch to
cool down.
DRIVING - Transmission
Y53-6110-1A1 (01/21) 159
4