operators_manual

Table Of Contents
WARNING
Driver Assistance features respond dif-
ferently
to specific road, weather, and
traffic conditions. The operator must
read the ADAS operator’s manual as-
sociated with this feature and under-
stand how it responds to these specific
conditions prior to driving the vehicle.
Failure to do so may result in death,
personal injury, or property damage.
Following Distance Five Bars
When Cruise Control is active, ACC will
accelerate and slow the truck to maintain a
chosen distance from a detected forward
vehicle. Collision Mitigation will attempt to
prevent a forward collision when advancing
at speeds greater than 15 mph (24 kph).
Please review the ACC section of this
manual, and the manufacturer
’s manual,
prior to driving this vehicle.
Adaptive Cruise Display
The display area for Active Cruise will
contain dynamic visuals related to whether
a tracked vehicle is in front and the amount
of following distance set for Active Cruise.
It will show an outline of a car in the display
area when the radar is tracking a vehicle.
Once it locks on to a tracked vehicle, it will
display horizontal bars to represent the
amount of following distance from the
tracked vehicle. Once it locks and tracks a
target vehicle, the system will adjust the
speed to accommodate the speed of the
tracked vehicle in front of it.
No T
racked Vehicle
The operator can set the amount of
following distance from the tracked vehicle.
There are five preset distances to choose
from, represented by horizontal bars
between the hood and the forward car
.
One bar represents the nearest following
distance.
Following Distance One Bar
Five bars represents a farther distance.
Following Distance Five Bars
See Set ACC Following Distance on page
146.
Set ACC Following Distance
Follow these steps to adjust the following
distance for Adaptive Cruise Control:
1.
Press the Toggle until the following
distance bars illuminate in the view.
If the vehicle has Predictive Cruise Control,
you may have to press multiple times to
cycle through the other settings for PCC.
2. Rotate the Toggle up or down to
choose the amount of following
distance.
3. Push the Toggle again to set the
following distance.
DRIVING - Driver Assistance
146 Y53-6110-1A1 (01/21)
4