operators_manual

including ignoring further input from the
accelerator pedal, but will only use engine
braking if available and enabled.
VRSL replaces the Cruise Control indicator
when active and will show the VRSL limit
to the right of the indicator
. This limit is
shown in gray but turns white when
actively limiting vehicle speed. MX
engines, additionally, show "LIMITED" on
the speedometer.
When active, the VRSL speed limit can be
changed using the LIM+ and LIM- buttons
in the right, steering wheel switch pod. See
How to Set the Variable Road Speed
Limiter. Enabling VRSL will disable Cruise
Control.
VRSL can be canceled by
• A long press of the Cruise Control
ON/OFF.
• Stopping then parking the vehicle.
• Activating the PTO (option) (MX
engine only).
1. Press the Cruise Control ON/OFF
button in the left, steering wheel
switch pod.
Indicates that the VRSL feature is
awaiting input.
2.
Press, or press and hold, LIM+ or
LIM- to incrementally, or
continuously, raise or lower the
VRSL limit.
The green VRSL indicator will
replace the Cruise Control
indicator, indicating that VRSL is
enabled. VRSL (like Cruise
Control) will use the current vehicle
speed as the VRSL limit until
changed.
Pressing either LIM+ or LIM- will adjust the
VRSL limit while this feature is active.
Adaptive Cruise Control (Option)
WARNING
The driver must remain alert, react ap-
propriately
, and use safe driving practi-
ces while using this Driver Assistance
feature.
Ultimate responsibility for safe
operation of the vehicle remains with
the driver at all times. Failure to do so
may result in death, personal injury, or
property damage.
WARNING
The driver must remain visually aware
of
the roadway and traffic and not rely
solely on Drivers Assistance features
to identify and respond to the variety of
vehicles or objects sharing the road.
The driver must read the ADAS opera-
tor’s manual associated with this fea-
ture and understand its limitations prior
to driving the vehicle. Failure to do so
may result in death, personal injury, or
property damage.
DRIVING - Driver Assistance
How to Set the Variable Road
Speed Limiter
The Variable Road Speed Limiter (VRSL)
cannot establish a limit while the parking
brake is set or the PTO is in operation. The
minimum VRSL setting is 25 mph (40 kph).
Enabling VRSL will disable Cruise Control
if Cruise Control is active.
Y53-6110-1A1 (01/21)
145
4