operators_manual
Table Of Contents
- Safety
- Using this Manual
- Safety Alerts
- Illustrations
- General Safety Instructions
- Data Recorder
- Environmental Protection Agency
- Repairs
- Additional Sources of Information
- Cab Access
- How to Access the Upper Bunk
- Deckplate Access
- How to open the hood
- Seat
- What to do before starting the vehicle
- Vehicle Loading
- Visual inspection while approaching the vehicle
- Daily Checks
- Weekly Checks
- Systems Check
- Emergency
- Roadside Assistance
- Low Air Alarm
- Stop Engine Light
- Low Oil Pressure
- Engine is Overheating
- How to Inspect and Replace a Fuse
- Where are the Fuses Located?
- How to Jump Start a Battery
- How to Recover a Vehicle
- Manually Release the Parking Brake
- Recovery Hitch
- How to use a Recovery Hitch
- How to Prepare the Axles for Towing
- How to Manually Lock a Differential
- Recovery Hitch Capacities
- Best Practices for Recovery Rigging
- Returning to Service After Recovering
- What to do if the Vehicle is Stuck in Sand, Mud, Snow or Ice
- Towing the Vehicle
- Controls
- Instrument Cluster
- Peterbilt Digital Display Controls
- Peterbilt Digital Display
- Selecting a View
- Configure Settings
- Drive Summary
- Driver Rewards (option)
- Driver Performance Assistant (option)
- Bulb Check
- Guide to the Warning Symbols
- ADAS Camera Fault
- Axle, Stability Control (Option)
- Axle, Traction Control
- Brakes, Antilock Brake System
- Brake, Park Brake
- Brakes, Low Air
- Brakes, Trailer Antilock Brake System
- Cruise Control
- Differential, Inter-Axle Lock
- Dump Truck, Body Up
- Dump Truck, Gate
- Diesel Particulate Filter (DPF) Warning Light
- Emissions, High Exhaust System Temperature
- Emissions, Malfunction Indicator Light
- Engine, Check Engine
- Engine, Engine Block Heater
- Engine, Low Coolant Level
- Engine, Overspeed Air Shutdown
- Engine, Retarder (Brake)
- Engine, Stop Engine
- Engine Wait-to-Start Light
- Emissions, Engine Derate
- Fifth Wheel Slide Unlocked
- Fifth Wheel Locked
- Fifth Wheel Unlocked
- Lights, High Beam
- Lane Departure Warning (LDW)
- Lane Departure Warning (LDW) Fault
- Fast Idle Control
- Refrigerator
- Seat Belt Fasten
- Tire Inflation (TPMS)
- Transmission, Auxiliary
- Transmission, Check
- Turn Signal, Left
- Turn Signal, Right
- Optional Gauges
- Dash Switches
- Axle, Differential Lock - Tridrive
- Axle, Diff-Lock - Dual
- Axle, Diff-Lock - Forward Rear
- Axle, Diff-Lock - Rear Rear
- Axle, Diff-Lock - Single Rear
- Axle, Diff-Lock - Steer
- Axle, Inter-Axle Differential Locked (Tandem)
- Axle, Two Speed
- Back Up Alarm Mute
- Batteries, Low Voltage Disconnect (LVD)
- Brakes, ABS Off-Road
- Brakes, Parking Brake Valve
- Brake, Trailer Hand
- Cab Dimmer Switch
- Dump Truck Gate
- Engine, Fan Override
- Engine, Heater
- Engine, Remote Throttle
- Engine, Overspeed Air Shutdown (Manual)
- Engine, Overspeed Air Shutdown (Test)
- Engine, Under Hood Air Intake
- Exhaust, Diesel Particulate Filter (DPF) Regeneration
- Fifth Wheel Slide
- Fuel Heater
- Generic Air, Accessory
- Generic, Spare SPARE
- Ignition Key Switch
- Lane Departure Warning (LDW) Disable
- Lights, Automatic
- Lights, Auxiliary
- Lights, Beacon
- Lights, Daytime Running (Override)
- Lights, Dome
- lights, Exterior lights Self Test
- Lights, Flood
- Lights, Flood (Spare)
- Lights, Fog
- Lights, Hazard
- Lights, Headlight
- Lights, Marker/Clearance
- Lights, Marker/Clearance/Trailer
- Lights, Park Light
- Lights, Spot
- Mud and Snow Traction Control
- Pintle Hook
- Power Take-off (PTO)
- Power Take-off (PTO), Forward
- Power Take-off (PTO), Rear
- Suspension, Axle, Pusher
- Suspension, Axle, Tag
- Suspension, Dump
- Suspension, Air Retention
- Suspension, Third Axle Lift
- Trailer Air Supply
- Trailer, Axle (3rd Axle) Lift
- Trailer, Axle Lift Forward
- Trailer, Axle Lift Rear
- Trailer, Belly Dump
- Trailer, Dump Gate
- Trailer, Belly Dump Gate Center
- Trailer, Belly Dump Gate Front
- Trailer, Belly Dump Gate Rear
- Trailer, Hotline
- Trailer, Suspension Air Dump
- Transmission, Transfer Case
- Transmission, Transfer Case Two-Speed
- Winch Clutch
- Ignition Key Switch
- Exterior Lighting Self-Test
- Steering Column Controls
- Steering Wheel Controls
- Door Mounted Mirror Controls
- Heating and Air Conditioning
- Sleeper Alarm Clock
- Cab Accessories
- Driving
- Starting and Operating
- Starting and Warming Up
- Engine Operations
- Indicators around the speedometer
- Engine Brake Operation
- Engine Brake Operation for a Vehicle with Automated Transmission
- How to Deactivate MAX Mode
- Engine Brake Indicator
- How to change Fast Idle Control (FIC) Speed
- How to Start the PTO
- Engine Fan Control
- Using a Winterfront
- How to Set the Shutdown Timer
- Engine Aftertreatment System
- Driver Assistance
- Transmission
- Brakes
- Axle and Suspension
- Trailer Operations
- Driving Tips and Techniques
- What to Consider when using a Sleeper Bunk
- Stopping the Vehicle
- Maintenance
- New Vehicle Maintenance Schedule
- First Day
- First 50-100 mi / 80-160 km
- First 500 mi / 800 km
- First 2,000 mi / 3,218 km
- First 3,000-5,000 mi / 4,800-8,000 km
- Maintenance Schedule
- At first 15,000 mi / 24,000 km or at first PM
- Component Specific Intervals
- Every 15,000 mi / 24,000 km / Monthly
- Every 25,000 mi / 40,000 km / 6 Months
- Every 30,000 mi / 48,000 km
- Every 60,000 mi / 96,000 km / 6 Months
- Every 120,000 mi / 192,000 km / Annually
- Every 240,000 mi / 384,000 km
- Every 300,000 mi / 480,000 km / 6,750 Hours / 3 Years
- Every 500,000 mi / 800,000 km / 5 years
- Every 750,000 mi / 1,200,000 km/ 24,000 Hours / 8 years
- Lubricants
- Checking Oil Level
- Air System
- Dual Air System Function Test
- Air Dryer Maintenance
- Air Tanks
- Air Gauges and Air Leaks
- Air Compressor
- Brake System
- Cab Maintenance
- Cab Structure, Doors and Hoods
- Safety Restraint System - Inspection
- Cooling System Maintenance
- Electrical System
- Engine Aftertreatment System Power Requirements
- Low Voltage Disconnect (LVD) (option)
- How to Replace a Headlight Bulb
- Aiming Headlights
- Fuses, Circuit Breakers and Relays
- Altering the Electrical System
- Vehicle CAN Bus
- Batteries
- Under Cab Battery Access
- In Cab Battery Access
- Cranking Battery Specification
- Removing Batteries
- Installing Batteries
- Replace Battery Box Cover
- Slow Battery Charging
- Alternator
- Remote Keyless Entry
- Engine Maintenance
- Frame
- Fuel System
- Front Axle and Suspension
- Heater and Air Conditioner Maintenance
- Noise and Emission Control
- Diesel Exhaust Fluid (DEF) Tank Straps
- Rear Axle and Suspension
- Steering System
- Driveline
- Tires
- Wheels
- Windshield Wiper/Washer
- Transmission Maintenance
- Hydraulic Clutch
- Specification Reference Charts
- Information
- Index
Removing a Gauge from Favorites
The Parking Brake must be set and at least
one gauge must be in the Favorites View
to remove a gauge.
The Speedometer/Tachometer, Fuel, and
Air pressure gauges located at the Display
center cannot be removed. If the gauge
you want to remove is part of a multiple
gauge group, the whole group must be
removed.
1. Select "Remove Gauge."
2. Scroll to highlight the gauge to be
removed and Select.
Navigate andSelect "Save Configuration" if
this is the last change you want to make to
Favorites View. The Display will read "Your
favorites configuration has been saved."
Press Back to exit Editing Favorites.
Shortcuts
Use the Shortcuts option to assign one of
the following features to the Shortcut
button.
• Dark Cabin – Toggles Dark Cabin
On/Off.
• Digital RPM – Provides a numeric
read-out of RPM within the
speedometer.
• Dual Speedometer – Shows a
compound Speedometer with both
Standard and Metric Values. .
• Favorites – Selects the Favorites
View on the Display.
• Metric Units – Switches all
measured units used on the
Display between Standard and
Metric.
Anti-Theft
Anti-Theft prevents starting the engine and
accessing the settings sub-menu. If Anti-
Theft does not show in the settings sub-
menu, see your authorized dealer to install
Anti-Theft.
If Anti-Theft is enabled, turning the ignition
switch to START prompts the operator to
enter the passcode. Once the correct
passcode is entered, you have five minutes
to start the engine or the passcode must
be re-entered.
3
To enable or disable Anti-Theft, change
Anti-Theft (ON/OFF) in the settings sub-
menu and enter the current passcode.
How to Enter the Passcode
The ignition key and the current Passcode
are required.
The default passcode is set to 0000 at the
factory. Please see an authorized dealer if
a custom passcode is needed. With the
anti-theft feature turned off, the operator
will not need a passcode to start the
engine.
1. Using the Scroll , scroll to the first
number in the code then press
Select.
Anti-theft first digit
The next digit will be selected.
3
The five minute timer can be postponed in one minute intervals using any steering wheel switch.
CONTROLS - Configure Settings
76 Y53-6126-1A1 (01/21)
3










