operators_manual

Configure Settings
Menu Example: main Menu
The following Menus
• Notifications
• Trip Summary
• Settings
• Truck Information
are accessible when
1. The Parking Brake is set
2. All active popup messages are
viewed and suppressed
3. Press the Select button
These menus allow the operator to
configure settings on the vehicle.
Notifications
Notifications display system messages
related to the condition of your vehicle. It
displays
• Tire Pressure Monitoring System
(TPMS) (optional)
• Active messages
• Systems Check
Trip Summary
Presents a summary of details such as fuel
economy and distance of the trip, collected
during the main trip and/or Sub-trips.
These details will be collected until the Trip
is reset, or the max trip distance (99,999.9
miles for main, 9,999.9 for Sub-Trips) is
reached.
Settings
Settings allows the operator to customize
the Display.
1
General
Time
This menu allows the operator to
customize the clock.
Automatic Time
(optional)
When enabled, trucks with
Automatic Time will receive time
zone appropriate data.
24-Hour
Time
Choose between 12 or a 24 hour format.
AM or PM (A or P) shall only be displayed
in 12-hour time format.
Set Time Set Time is available when Automatic Time
isn't enabled. Set the clock to indicate your
local time.
Units and Language
Units
Use this setting to change the units of
measurement between Standard, Metric
(Bar), and Metric (PSI).
Language
Use this setting to change the language.
Features
Features allows the operator to enable
optional features on the vehicle to
customize their experience.
Predictive Cruise Overshoot
Configure the Predictive Cruise Control
Overshoot through this menu item. See
Predictive Cruise Control (Option) on page
1
If Anti-Theft is enabled, Settings will not be accessible until the correct Passcode is entered.
CONTROLS - Configure Settings
72 Y53-6126-1A1 (01/21)
3