operators_manual

NOTE
GVW is the TOTAL SCALE WEIGHT
the vehicle is designed to carry. This
includes the weight of the empty vehi-
cle, loading platform, occupants, fuel,
and any load.
Noise Emission Label
The Noise Emission Label is located in the
driver's side door frame. It contains
information regarding U.S. noise emission
regulations, chassis number, and date of
manufacture.
Paint Identification Label
The Paint Identification Label contains the
paint colors used by the factory to paint
your vehicle. It lists frame, wheels, cab
interior and exterior colors. This label is
located inside the glove box.
Federal Safety Standard
Certification Label
The NHTSA regulations require a label
certifying compliance with Federal Safety
Standards, for United States and U.S.
Territories, be affixed to each motor vehicle
and prescribe where such label may be
located. This certification label, which
indicates the date of manufacture and
other pertinent information, is located on
the driver’s side door edge or on the
driver’s side door frame.
Component Identification
Each of the major components on your
vehicle has an identification label or tag.
For easy reference, record component
numbers such as, model, serial, and
assembly number.
Engine For further information, please refer to the Engine Operation and Maintenance Manual.
Transmission For both manual and automatic transmissions, the identification number is stamped on a tag
affixed to the right rear side of the transmission case.
Clutch Enclosed in clutch housing. Location depends on manufacturer.
Steer Axle The front axle serial number is stamped on a plate located on the center of the axle beam.
Axle Specification Number Usually stamped on the right rear side of the axle housing. This number identifies the
complete axle.
Axle Housing Number Usually located on the left forward side of the housing arm. This tag identifies the axle
housing.
INFORMATION - Vehicle Identification Labels
Y53-6126-1A1 (01/21) 313
6