operators_manual

Table Of Contents
1. Make sure that the vehicle frame
rail is standing on a flat and level
surface.
2. Make sure that the vehicle is
horizontal, both lengthwise and
crosswise. Check this carefully on
a vehicle with air suspension. Note
that the engine may be inclined up
to 4 degrees, depending on the
vehicle model and wheelbase.
3. Twist the dipstick handle to unlock
it, then pull the dipstick out of the
holder.
4. Wipe the dipstick clean with a lint-
free cloth.
5. Place the dipstick back into the
holder.
6. Pull the dipstick out again and
check the oil level. The oil level
should always be between the two
marks on the dipstick.
Engine Oil Dip Stick Markings
1
2
1. High oil level (1)
2. Low oil level (2)
7. Reinstall the dipstick and twist to
lock it in place.
Topping Up the Engine Oil
1. Top up with oil, if necessary, via the
filler opening. Use the correct
grade in the correct quantity. For oil
replacement, please see engine
Operator’s Manual included with
this chassis.
2. After topping up, wait 1 minute and
check the oil level again.
MAINTENANCE - Engine Maintenance
Y53-6126-1A1 (01/21) 265
5