operators_manual

Table Of Contents
Every 240,000 mi / 384,000 km
14
Drive Axle - Vocational (PACCAR) - Axle Assembly
Drain and replace SYNTHETIC BASE lubricant.
Hub, Drum, and Hubcap - Hubs (non-LMS) with Outrunner Seals
Clean the components and check for excessive wear or damage. Change the oil and seal. (Refer to Wheels on page 294 for
maintenance instructions.)
Every 300,000 mi / 480,000
km / 6,750 Hours / 3 Years
Every 300,000 mi / 480,000 km / 6,750 Hours / 3 Years
15
Cooling - Extended Life Coolant (ELC)
Replace blank water filter, if applicable. (Refer to Cooling System Maintenance on page 250 for maintenance instructions.)
Hub, Drum, and Hubcap - LMS Hubs (Dana) with Mineral Lubricant
Wheels on page 294
14
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
15
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 300,000 mi / 480,000 km / 6,750 Hours / 3 Years
228 Y53-6126-1A1 (01/21)
5