operators_manual

Table Of Contents
Every 60,000 mi / 96,000 km / 6 Months
12
Power Steering - Steering Gear
Check the lash of the sector shaft: adjust as required. (Refer to Steering System on page 288 for maintenance instructions.)
Grease the trunnion bearing (EP NLGI #2 lithium-based, moly-filled, HD grease.) (Refer to Steering System on page 288 for
maintenance instructions.)
Grease the input shaft seal (EP NLGI #2 lithium-based, moly-filled, HD grease.) (Refer to Steering System on page 288 for
maintenance instructions.)
Power Steering - Hoses and Tubes
Check for leaks and chafing. (Refer to Steering System on page 288 for maintenance instructions.)
Steering Components - Drag link Tube Clamp and Ball Socket
Check the torque: tighten to specified torque value as required. (Refer to Steering System on page 288 for maintenance
instructions.)
Steering Components - Pitman Arm Clamp Bolt and Nut
Check the torque: tighten to specified torque value as required. (Refer to Steering System on page 288 for maintenance
instructions.)
Steering Components - Steering Intermediate Shaft
Check the torque on the pinch bolt and nut. (Refer to Steering Shaft Bolt Torque Specifications on page 290 for maintenance
instructions.)
Steering Components - Steering Intermediate Shaft U-joints (ON HIGHWAY)
Lubricate [EP NLGI #2 HD grease, -10 to 325°F (-23 to 163°C) range]. (Refer to Steering System on page 288 for maintenance
instructions.)
12
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 60,000 mi / 96,000 km / 6 Months
Y53-6126-1A1 (01/21) 219
5