operators_manual

Table Of Contents
Every 60,000 mi / 96,000 km / 6 Months
12
Disc Brakes (Bendix®) - Caliper Slide Pins
Inspect protective caps of the guide pins for damage or cracking. (Refer to Air Disc Brakes on page 240 for maintenance
instructions.)
Disc Brakes (Bendix®) - System Operation
Check operation: inspect as per manufacturer’s service literature. (Refer to Air Disc Brakes on page 240 for maintenance
instructions.)
Hub, Drum, and Hubcap - LMS Hubs (Dana)
Inspect for leaks. Check the bearing endplay and adjust as required. (Refer to Wheels on page 294 for maintenance
instructions. )
Main and Auxiliary Transmission (including Eaton Automated or PACCAR Transmission) - Mounting Brackets and Fasteners
Check the condition of the fasteners and their torque. Tighten to the specified torque value as required. (Refer to Frame
Fastener Torque Requirements on page 304 for maintenance instructions.)
Main and Auxiliary Transmission (including Eaton Automated or PACCAR Transmission) - Oil Cooler
Clean the fins (air-to-oil type) and body. Check the hose condition and for leaks: replace as required. (Refer to Cooling System
Maintenance on page 250 for maintenance instructions.)
Main and Auxiliary Transmission (including Eaton Automated or PACCAR Transmission) - Main and Auxiliary Transmission (OFF
HIGHWAY)
Drain lubricant while warm. Flush each unit with clean flushing oil. (Refer to Transmission Maintenance on page 297 for
maintenance instructions.)
12
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 60,000 mi / 96,000 km / 6 Months
Y53-6126-1A1 (01/21) 217
5