operators_manual

Table Of Contents
At first 15,000 mi / 24,000 km or at first PM
8
Fuel and Tanks - Fuel Tank Straps
Check the strap tightness: tighten to proper torque value as required; aluminum tank - 30 lb-ft (41 N·m) cylindrical steel tank - 8
lb-ft (11 N·m.) (Refer to Fuel Tank on page 273 for maintenance instructions.)
Driveshafts - Models SPL-90, 1710 and 1810 Slip Member and U-joints
Lubricate
*
Driveshafts - Models SPL- 140/140HD/170/170HD/250/250HD Slip Members and U- joints (OFF HIGHWAY)
Lubricate
*
Electrical and Lights - Fuel and Diesel Exhaust Fluid Tank Sending Unit
Check the mounting screws and electrical connections for worn or damaged wires and connectors. (Refer to Diesel Exhaust
Fluid (DEF) Tank Straps on page 282 for maintenance instructions.)
Component Specific
Intervals
These maintenance tasks should be
reviewed at each maintenance interval.
They are not specific to one interval.
8
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
*
Use only Spicer Driveshaft approved lubricants when greasing Spicer U-joints.
MAINTENANCE - Component Specific Intervals
Y53-6126-1A1 (01/21) 199
5