operators_manual

PCC Undershoot
Follow these steps to adjust the
undershoot value for Predictive Cruise
Control:
1. Press the Toggle twice.
+
-
The bottom value below the set
speed will illuminate.
2. Rotate the Toggle up or down to
set the value.
3. Push the Toggle again to confirm
the value.
If you want to set the Overshoot value, see
Predictive Cruise Overshoot on page 72.
Lane Departure Warning (LDW)
WARNING
The driver must remain alert, react ap-
propriately, and use safe driving practi-
ces while using this Driver Assistance
feature. Ultimate responsibility for safe
operation of the vehicle remains with
the driver at all times. Failure to do so
may result in death, personal injury, or
property damage.
WARNING
The driver must remain visually aware
of the roadway and traffic and not rely
solely on Drivers Assistance features
to identify and respond to the variety of
vehicles or objects sharing the road.
The driver must read the ADAS opera-
tor’s manual associated with this fea-
ture and understand its limitations prior
to driving the vehicle. Failure to do so
may result in death, personal injury, or
property damage.
WARNING
Driver Assistance features respond dif-
ferently to specific road, weather, and
traffic conditions. The operator must
read the ADAS operator’s manual as-
sociated with this feature and under-
stand how it responds to these specific
conditions prior to driving the vehicle.
Failure to do so may result in death,
personal injury, or property damage.
Using a windshield-mounted, forward
facing camera, the Lane Departure
Warning (LDW) feature monitors the road
for lane markings and alerts the driver
when the vehicle departs its lane without
the use of the turn signal. Lane departure
warning is only active at speeds greater
than 37 MPH (60 km/h).
LDW is not available when the system
cannot accurately detect lane markings;
therefore, the camera should be clear of
potential obstructions for the LDW feature
to operate properly.
DRIVING - Driver Assistance
150 Y53-6126-1A1 (01/21)
4