operators_manual

Image Function
Defrost Vents (and Fresh air intake)
Panel and Floor Vents
Panel Vents
Floor and Defrost Vents (and Fresh air intake)
How to Manually Control
the Cab Air Conditioner
Temperature
Control Set
Point
The cab temperature is set using the
temperature control dial. The
operating range is 60°F (16°C) and
84°F (28°C). Adjustments are made
in two degree increments.
Air
Conditioner
The button inside the temperature
control dial engages the A/C
compressor
. When activated the
indicator on the button will illuminate.
During AUTO mode, the A/C button
indicator will remain illuminated at all
times even though the compressor
may be cycling.
NOTE
Fan Control Dial must also be in the
ON
position for A/C to be on. A/C en-
gages automatically in AUTO, defrost,
and floor/defrost.
The air conditioner defaults to Manual
mode when turned on. The fan speed, air
temperature, and air outlets are selected
using the dials on the controller
.
1. To adjust the fan speed, turn the
Fan Control dial clockwise to
increase speed or
counterclockwise to decrease
speed.
2.
To adjust the temperature setting,
turn the Temperature Control dial
to the desired temperature. The
system automatically adjusts the
outlet air temperature to achieve
the desired cab temperature.
3. Push the Air Conditioner button if
the air temperature needs to be
colder, this button will manually
turn on the compressor
4. To adjust the air distribution, turn
the Air Distribution dial to
CONTROLS - How to Manually Control the Cab Air Conditioner
Y53-6096-1C1 (09/20) 99
3