operators_manual

Pintle Hook
Turn switch on to remove the slack from
the T
ow Hook.
Power Take-off (PTO)
This vehicle may be equipped with a dash
mounted switch that controls PT
O
engagement/disengagement. When the
operator activates the switch for the PTO,
the status indicator light (located on the
switch) will immediately illuminate even
though PTO engagement may not have
occurred. If the PTO is engaged and the
operator turns the switch OFF, the PTO
status indicator light (located on the switch)
will go out immediately even though PTO
disengagement may not have occurred.
NOTE
Actual PTO engagement/disengage-
ment
may be delayed momentarily
since it is controlled by the air system
and mechanical movement.
CAUTION
Increasing engine rpm before the PTO
is
actually engaged could prevent the
PTO from engaging and/or cause PTO
damage.
Power Take-off (PTO), Forward
Your vehicle may be equipped with a dash
mounted switch that controls forward PT
O
engagement/disengagement.
Power Take-off (PTO), Rear
Your vehicle may be equipped with a dash
mounted switch that controls the rear PT
O
engagement/disengagement.
Suspension, Axle, Pusher
Turn switch on to lower Single or Forward
Pusher Axle.
Suspension, Axle, T
ag
Turn switch on to lower tag axle.
Suspension, Dump
CONTROLS - Dash Switches
94 Y53-6096-1C1 (09/20)
3