operators_manual

2. Release the signal stalk.
3.
The turn signal will cancel when
the turn is complete.
An audible beep is associated with each
time a turn indicator is activated.
WARNING
After you complete a turn, shut the
system
off by returning the lever to the
"OFF" (center) position. Failure to shut
off a turn signal could confuse other
drivers and result in an accident. An
indicator lamp in the instrument panel
will flash until the turn signal is turned
off.
How to Turn on High
Beams
The high beam function is operated by the
same steering column lever for the turn
signals. High beams will not turn on if the
headlights are turned off.
1. Gently pull the Turn Signal lever
toward the steering wheel until you
hear the switch click and the beam
changes.
2. To return to previous beam, pull the
T
urn Signal lever towards the
steering wheel again.
The blue indicator light in the instrument
panel will turn ON when the high beams
turn on.
How to Momentarily Flash
High Beams
The "flash to pass" high beam function is
operated by the same steering column
lever for the turn signals. The high beam
flash to pass will work if the headlights are
not on.
1.
Gently push the turn signal lever,
away from the steering wheel.
2. The lever will automatically return
when the lever is released.
The blue indicator light in the instrument
panel will momentarily turn ON and the
high beams will flash. The high beams will
not remain on if the lever is still pressed.
CONTROLS - How to Turn on High Beams
Y53-6096-1C1 (09/20) 81
3