operators_manual

trip distance (99,999.9 miles for main,
9,999.9 for sub-trips) is reached. For
detailed trip information see T
rip Summary
located in the menu.
Adaptive Cruise (option)
The Adaptive Cruise view contains optional
features designed to improve the driving
experience. This view provides the
following features:
•
Adaptive Cruise Control (ACC) –
see Adaptive Cruise Control
A minimized version of the driver assistant
is presented during all views when the
engine is on and the parking brake is
released.
PTO (option)
This truck may be equipped with Power
Take-Off (PTO). Activation locations for
PTO can be customized during its
installation: within the cab, at the device
being powered or at a remote location.
PTO operation is enabled by using the
dash mounted PTO switch in conjunction
with the cruise control feature.
When enabled, the tachometer will
represent PTO operation, and may display
the following additional PTO related
information:
• Engine RPM – indicated near the
tachometer as well as on the scale
line.
• Pre-set indicators – preset RPM
speeds designed for specific PTO
uses indicated above the scale
line.
• RPM limits – indicated by the red
zones at the upper and lower RPM
range and are determined by your
engine.
• PTO hours – shows engine hours
used during PTO activity.
• DPF Status – shows Diesel
Particulate Filter usage as a
percentage.
• Engine Torque – shows the
percentage of max engine torque
being exerted.
• PTO indicator – appears when the
conditions for PTO operation have
been met, and changes color to
indicate PTO activity.
• PTO mode – visible at the center of
the gauge when different PTO
modes are active.
Your PTO may have a variety of modes:
• Cab PTO Mode
• Remote PTO Mode
• Cab Pump Mode
• Remote Pump Mode.
Dependent on your engine these modes
can be read inside the tachometer. For
more information on PTO operation see
CONTROLS - Views
Y53-6096-1C1 (09/20) 73
3