operators_manual

notifications (called Popups), indicators,
and audible alarms. Some conditions are
communicated for informational purposes
only while others may require an operator
response.
Popups
A popup communicates information. This
could be due to a gauge indicating outside
of its normal operating range or to notify
the operator about a specific truck
condition. Popups can be red, amber or
white. Red and amber popups are totaled
in the Active W
arnings Indicator. A popup's
characteristics (color, brilliance, and
whether it flashes or has an audible alarm)
depend on the condition which generated
the popup.
When multiple popups are present, each is
assigned a priority and placed in a stack.
Higher priority popups are placed towards
the front of the stack. The Select button
cycles through the active popups, allowing
each popup in the stack to be viewed.
Some popups, once viewed, are removed
from the stack; these popups are called
suppressible. Suppressible popups show
an “X” below the Select icon and typically
don't require an immediate response.
Suppress these popups using the Back/
Cancel button (or the Select when the
parking brake is set). Non-suppressible
popups cannot be removed from the stack
until the parking brake is set.
Suppressible Popup
Indicated left to right, top to bottom:
•
Stack Size – The lower number
indicates how many popups are in
the stack (suppressible and non-
suppressible), and the upper, which
popup is being viewed.
• Title – Indicates affected system.
• Suppressibility – Indicates if the
current popup is suppressible.
2
• Instructions – Contain instructions
or elaborating information.
The menu is not accessible until all popups
have been suppressed.
3
Active W
arnings
Red and amber popups will generate an
active warning. Active warnings provide an
additional reminder of the new and ongoing
conditions which have generated a popup
(both suppressed an unsuppressed). An
active warnings count is presented in the
• Systems Check
• Notifications sub-menu
• Post-trip
• Active Warnings indicator.
The active warnings count may change
without user interaction if individual
warnings are intermittent, time based, self
correcting, or the situation is rectified.
Dynamic Gauge Container
A gauge not present in the current view
and indicating out of its normal operating
range will appear in the dynamic gauge
container. Once this gauge returns to its
2
The Select icon used here is for the Menu Control Switch (MCS); vehicles with steering wheel controls indicate dif
ferently.
3
All popups become suppressible when the parking brake is set.
CONTROLS - Display Notifications
Y53-6096-1C1 (09/20) 69
3