operators_manual

Gauges that enter a red zone will enlarge
and turn red. If the gauge value rises into
this zone, this boundary will indicate with a
white line, if it lowers, it indicates with a red
line.
Gauges that stop receiving input from the
systems they monitor
, will display the text
“Data Error” and turn gray, with critical
gauges instead, turning red. Gauges
displaying “Data Error” will stop presenting
values reflecting the systems they monitor.
Optional Gauges
Optional physical gauges will be located to
the right of the Display.
Peterbilt Digital Display
The digital display will stay visible during all
driving situations and in some parked
situations. When the parking brake is set
the following actions will wake the display,
making it visible:
• Opening (or keeping open) the cab
doors
• Activating exterior lights (see
Lights, Headlight on page
92).
• Tapping the brake
• Turning the ignition switch to ON,
ACC, or START
• Starting the engine.
If after 20 seconds none of these actions
are taken, the display will darken to
conserve power, but will awaken if any
wake action is performed. If the Anti-Theft
option is active and you attempt to start the
engine, a passcode prompt will appear; the
engine cannot be started until the correct
passcode is entered (for more information
see Anti-Theft on page 68)
Digital Display Features
Indicating from top to bottom:
•
Time
• Outside Air Temperature (OAT)
• Engine Hours
• PTO Hours
CONTROLS - Peterbilt Digital Display
Y53-6096-1C1 (09/20) 67
3