operators_manual

belt is fastened.
WARNING
DO NOT remove, modify, or replace
the
tether belt system with a different
tether system. A failed or missing teth-
er belt could allow the seat base to
fully extend in the event of an acci-
dent. Failure to comply may result in
death or personal injury.
WARNING
Failure to adjust external tether belts
properly
can cause excessive move-
ment of the seat in an accident. Tether
belts should be adjusted so that they
are taut when the seat is in its most
upward and forward position. Failure
to comply may result in death or per-
sonal injury.
Adjust an external tether by either
lengthening or shortening the strap. T
o
lengthen it:
1. Turn the buckle to a right angle to
the webbing.
2. Then pull the buckle.
3. To shorten the tether, pull on the
strap.
Komfort Latch Feature
WARNING
DO NOT set the Komfort Latch with
too
much slack. Too much slack may
reduce the effectiveness of the seat
belt. Failure to comply may result in
death or personal injury.
To eliminate cinching, simply activate the
Komfort Latch device located on the seat
belt webbing at the appropriate time:
1.
Adjust the seat to its proper driving
position.
SAFETY - Standard Seat
Tether Belts
Make sure that the tether belt is attached
to the cab floor and seat frame. It should
be routed through the buckle on each side.
Often the attachments are made using a
split-type hook. Make sure both halves of
the hook are around the anchor bracket.
Y53-6096-1C1 (09/20)
21
1