operators_manual

Table Of Contents
Every 30,000 mi / 48,000
km
Every 30,000 mi / 48,000 km
17
Front Suspension - Spring Pins
Lubricate with approved grease. (Refer to Front Axle and Suspension on page 224 for maintenance instructions.)
Drive Axle - Linehaul (PACCAR) - Axle Assembly
Check oil level and inspect for leaks.
Visually inspect for damage or leaks.
Drive Axle - Linehaul (PACCAR) - Breather
Check the operation. If the cap doesn't rotate freely, replace.
Drive Axle - Vocational (PACCAR) - Axle Assembly
Drain and replace MINERAL BASE lubricant.
Drive Axle (Meritor Line Haul / ON HIGHWAY) - Axle Housing
Check the "cold" fill level at the differential carrier plug for a pinion angle of less than 7 degrees, or at the axle bowl plug for a
pinion angle of greater than 7 degrees. Tighten the plug to 35-50 lb-ft (47-68 N·m.) (Refer to Drive Axle - Meritor on page 234
for maintenance instructions.)
Visually inspect for damage or leaks. (Refer to Drive Axle - Meritor on page 234 for maintenance instructions.)
17
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
MAINTENANCE - Every 30,000 mi / 48,000 km
those listed here.
Y53-6096-1C1 (09/20) 161
5