Brochure

1/2" Stand-off Clip
for use on pipe or
tubing with ID of 1/2"
Product Code: P4BK
3/8" Flush
Mount Clip
for use on pipe or
tubing with ID of 3/8"
Product Code: F4OD
5/8" Flush
Mount Clip
for use on pipe or
tubing with ID of 5/8"
Product Code: F6OD
1/2" Flush
Mount Clip
for use on pipe or
tubing with ID of 1/2"
Product Code: F5OD
3/4" Stand-off Clip
for use on pipe or
tubing with ID of 3/4"
Product Code: P6BK
Easy to load! Just open the gun magazine and load a strip of 20 clips. After each clip
is fired from the gun, the strip advances into position to fire the next one.
Easy to inventory! Each RB Clip box contains 5 strips
of clips, with the two nails preinserted, ready to load
and shoot. No more fumbling with loose manual clips...
Installations with RB Clips are fast and secure. The clips fit perfectly: they can't cut into or damage the tubing in any way.
Flush mount clips hold the tubing against the surface and have a low profile. Stand-off clips position the tubing away from
the surface.
3/8" Stand-off Clip
for use on pipe or
tubing with ID of 3/8"
Product Code: P3BK
Whether attaching pipe for residential water systems, or tubing
for radiant heating in a staple-up or staple-down system, the
RB Clip Gun Systems provide installations that are fast,
secure, and damage-free!
RB Clip housings are manufactured
of high-density polyethylene that is
lightweight yet strong. Two galva-
nized nails per clip are driven 5/8"
into the wooden surface, providing
an installation that is both strong
and permanent.
U.S. Patents 4,801,061 & 4,801,064 & 5,350,267.
Foreign patents issued and pending.