Instructions

VersiDrive i E3 User Guide Revision 1.03
www.peter-electronic.com
15
5 Operation
5. Operation
5.1. Managing the Keypad
The drive is configured and its operation monitored via the keypad and display.
NAVIGATE
Used to display real-time information, to access and exit
parameter edit mode and to store parameter changes
UP
Used to increase speed in real-time mode or to increase
parameter values in parameter edit mode
DOWN
Used to decrease speed in real-time mode or to decrease
parameter values in parameter edit mode
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running drive.
START
When in keypad mode, used to Start a stopped drive or to
reverse the direction of rotation if bi-directional keypad
mode is enabled
5.2. Changing Parameters 5.3. Read Only Parameter Access 5.4. Resetting Parameters
STo
SToSTo
SToP
PP
P
Press and hold
the Navigate
key > 2
seconds
STo
SToSTo
SToP
PP
P
Press and hold the
Navigate key > 2 seconds
P-def
P-defP-def
P-def
To reset
parameter
values to their
factory default
settings, press
and hold Up,
Down and
Stop buttons
for > 2
seconds.
The display will
show “p-def
p-defp-def
p-def”
P-01
P-01P-01
P-01
Use the up and
down keys to
select the
required
parameter
P-0
P-0P-0
P-00
00
0
Use the up and down
keys to select P-00
P-08
P-08P-08
P-08
Press the
Navigate key
for < 1 second
P00-01
P00-01P00-01
P00-01
Press the Navigate key for
< 1 second
Stop
StopStop
Stop
Press the Stop
key.
The display will
show “stop
stopstop
stop”
10
10 10
10
Adjust the
value using the
Up and Down
keys
P
PP
P00-08
00-0800-08
00-08
Use the up and down
keys to select the
required Read Only
parameter
5.5. Resetting A Fault
O-I
O-IO-I
O-I
Press the Stop
key.
The display will
show “stop
stopstop
stop”
P-08
P-08P-08
P-08
Press for < 1
second to
return to the
parameter
menu
330
330 330
330
Press the Navigate key for
< 1 second to display the
value
P-08
P-08P-08
P-08
Press for > 2
seconds to
return to the
operating
display
STo
SToSTo
SToP
PP
P
Press and hold the
Navigate key > 2 seconds
to return to the operating
display
Stop
StopStop
Stop