User Manual

GETTING STARTED
1. Setting up your Petcube Play camera on iOS device
To set up your Petcube, download Petcube application to your iOS device.
The Petcube app requires iOS 8.4 or greater and can be downloaded in the App
Store or at the link below:
www.petcu.be/ios-app-download
Connect your Petcube to a power source and wait up to a minute until the LED
light starts pulsing green. Open the Petcube app on your iOS device, log in
or sign up for a Petcube account using your email or Facebook account. Go
to the ‘Home’ tab, select ‘connect your device’ and pick your Petcube from the list
of options. Keep in mind that you may be asked to turn on Bluetooth.
When the LED light on the camera is pulsing green, hit Next. To identify
the device, press ‘Select’ below the image of Petcube and hit ‘Next’ again when
the LED starts pulsing green rapidly. Wait for the app to exchange data with
the Petcube and scan for available Wi-Fi networks, then select your home Wi-Fi
network from the list, put in your network password and hit ‘Join’. If you don’t
see your home network on the list or if you’re using a hidden network, connect
to your home Wi-Fi by entering the name of your network and password
manually and then hit ‘Join’ (keep in mind that it is case sensitive).
Once the LED light on your Petcube changes to solid white, you are ready to play
with your Petcube.
4