User Manual

9
Fig. 4.2.5 Fig. 4.2.6
Step 6. To identify your device, tap
‘Select’. When the light on the device
blinks green rapidly, tap ‘Next’ (fig
4.2.10).
Step 7. Wait for the app to exchange
data with the Petcube and scan for
available Wi-Fi networks (fig 4.2.11),
then select your home Wi-Fi network
from the list (fig 4.2.12), put in your
network password and hit ‘Join’. If you
don’t see your home network on the
list or if you’re using a hidden network,
connect to your home Wi-Fi by
entering the name of your network and
password manually and then hit ‘Join’
(keep in mind that it is case sensitive).
Step 8. Your Petcube device is almost
set! Please wait until it connects and
the light on the front turns white
(fig 4.2.14).
Step 9. Once the LED light on your
Petcube changes to solid white, you are
ready to play with your Petcube
(fig 4.2.15).
Reminder: It is likely that your Petcube
will need a firmware update right after
it is connected. The firmware update
will be downloaded to your camera
Fig. 4.2.7 Fig. 4.2.8