User Manual

62
LED LIGHT NOTIFICATIONS
9
Steady Green
If you just powered your Petcube up, it
will show this color while it boots up for
up to 30 seconds. If it’s steady yellow
during the setup, it usually takes up
to a minute to complete
the registration.
Pulsing Green
Setup mode
Fig. 9.1
Fig. 9.3
Fig. 9.2
Fig. 9.4
Steady White
Online, standby mode.
Pulsing White
Petcube Care™ is active, saving
video to your timeline
The LED light on the front of your Petcube tells you about its status.