User Manual

56
To calibrate the laser:
1. Open the Petcube app
2. Go to the camera profile
3. Tap the ‘Settings’ wheel
in the upper right corner
4. Look for ‘Calibration’ and then follow
the steps on the screen (fig 8.13.1)
Keep in mind that if you wish
to place your Petcube in a different
location after you calibrated the laser,
you will need to follow the calibration
process again.
Fig. 8.13.1
14. No sound comes out of my Petcube
For the two-way audio to work, Petcube requires access to the microphone on your
mobile device. To grant access to it, open the ‘Settings’ menu on your phone, then
go to ‘Privacy’ and then ‘Microphone,’ and make sure you have allowed the Petcube app
to use your phone’s mic.
15. Poor video quality or poor network conditions
Like with most video streaming services and products, video quality is often affected
by router performance and/or your Internet connection. This can be improved if you
place Petcube closer to your home Wi-Fi router or by arranging it so there aren’t any
obstacles between it and your router (i.e. walls, floors, etc.).
Petcube also requires at least a 1 Mbps Internet connection upload and download speed
(2 Mbps is recommended). If your Internet connection speed is less than 1 Mbps, we
recommend upgrading for the best experience and highest video quality. To check