User Manual

31
21. Moving your Petcube to a different location or changing Wi-Fi settings
As long as the Petcube is within range
of your wireless network, you can
reposition it according to your needs.
However, if you’re trying to use
it in a different Wi-Fi environment
or want to connect the camera
to a different wireless network,
you need to change the Wi-Fi settings
in the Petcube app.
To do that:
1. Open the Petcube app
2. Go to the camera profile, tap
the ‘Settings’ wheel in the upper
right corner if you use Android
or tap the ‘Play’ icon if you use iOS
(fig 4.21.1)
3. Tap the ‘Settings’ wheel in the upper
right corner (fig 4.21.2)
4. Select ‘General’ (fig 4.21.3)
5. Tap ‘Change Wi-Fi’ (fig 4.21.4)
6. Power up your Petcube Play,
wait 1 minute until it starts up.
7. Find a reset pin that came with
your Petcube, find a small hole
on the bottom of the device, insert
the reset pin into it, hold it down
for 3 seconds until the light changes
to pulsing green and follow
the steps on your screen.
Fig. 4.21.2
Fig. 4.21.4
Fig. 4.21.1
Fig. 4.21.3