User Manual

27
Fig. 4.15.1 Fig. 4.15.2
Fig. 4.15.3
Fig. 4.15.5
Fig. 4.15.4
15. Using motion and sound detection
If you are not using Petcube Care
cloud-based video storage service,
the Petcube app can send push
notifications to your smartphone
whenever motion or sound is detected
on your Petcube. To enable push
notifications:
1. Open the Petcube app
2. Go to the camera profile, tap
the ‘Settings’ wheel in the upper
right corner if you use Android or
tap the ‘Play’ icon if you use iOS
(fig 4.15.1), then tap ‘Settings’
in the upper right corner (fig 4.15.2)
3. Select ‘Notifications’ (fig 4.15.3)
4. Turn ‘Motion Detection’ and ‘Sound
Detection’ options ON (fig 4.15.4)
You can also adjust the sensitivity of
the motion and sound detection
sensors by moving the slider (fig 4.15.5).
Keep in mind that in order to be able
to change the settings on your Petcube,
it needs to be in online standby mode
(steady white light).
If you are using Petcube Care cloud
history service, the Petcube app will
record videos triggered by motion and
sound detection and you can configure
push notifications to be sent as soon
as new video recordings are available.