Installation Manual

50
Fig. 8.4.3 Fig. 8.4.4
2. Password length: check the entered
password length and keep in mind
that normally the password length
is 8+ characters long
3. Keyboard language: check
the onscreen keyboard language
and make sure you enter password
in the correct keyboard layout
To reset the Wi-Fi password:
1. Open the Petcube app
2. Go to the camera profile, tap
the ‘Settings’ wheel in the upper
right corner if you use Android
or tap the ‘Play’ icon if you use iOS
(fig 8.4.1)
3. Tap the ‘Settings’ wheel in the upper
right corner (fig 8.4.2)
4. Select ‘General’ (fig 8.4.3)
5. Tap ‘Change Wi-Fi’ (fig 8.4.4)
6. Power up your Petcube,
wait 1 minute until it starts up.
7. Find a reset pin that came with your
Petcube, find a small hole
on the bottom of the device, insert
the reset pin into it, hold it down for
3 seconds until the light changes to
pulsing green and follow the steps
on your screen.