Troubleshooting Guide

yellow for up to a minute (although it may look light green) so wait 1 minute until it
starts blinking green. If it doesn’t start blinking, find a reset pin that came with your
Petcube, find the small hole below the USB port on the left side of the Petcube
Bites, insert the reset pin into it and hold it down for 3 seconds until it changes to
green.
If you’re using an iOS device:
1. Open Petcube application.
2. Go 2. Go to 'Home' tab and select 'Connect your device'.
3. Select Petcube Camera in the list of options instead of Petcube Bites.
4. Follow the steps on the screen.
5. On step 3, open 'Settings' on your phone, go to 'Wi-Fi settings', connect to
Petcube Bites Wi-Fi and return to the Petcube app.
6. Wait for the app to exchange data with the Petcube and scan for available Wi-Fi
networks.
7
7. Select your home Wi-Fi network from the list, put in your network password and
hit 'Join'.
If you don't see your home network in the list or if you're using a hidden network,
connect to your home Wi-Fi by entering the name of your network and password
manually and then hit 'Join' (keep in mind that it is case sensitive).
Once the LED light on your Petcube camera changes to solid white, you are ready
to play with your Petcube.
If If you’re using an Android device:
1. Open 'Settings' on your phone and temporarily disable cellular data (mobile data)
so that you are only using Wi-Fi during setup.
2. Open Petcube application.
3. Go to 'Home' tab and select 'Connect your device'.