User Manual

53
in the first example and lowercase
in the second example.
2. Password length: check
the entered password length
and keep in mind that normally
the password length is 8+ characters
long
3. Keyboard language: check
the onscreen keyboard language
and make sure you enter password
in the correct keyboard layout
To reset the Wi-Fi password:
1. Open the Petcube app
2. Go to the camera profile, tap
the ‘Settings’ wheel in the upper
right corner if you use Android
or tap the ‘Play’ icon if you use iOS
(fig 8.4.1)
3. Tap the ‘Settings’ wheel in the upper
right corner (fig 8.4.2)
4. Select ‘General’ (fig 8.4.3)
5. Tap ‘Change Wi-Fi’ (fig 8.4.4)
6. Power up your Petcube,
wait 1 minute until it starts up
7. Find a reset pin that came with your
Petcube, find a small hole
on the bottom of the device, insert
the reset pin into it, hold it down for
3 seconds until the light changes
to pulsing green and follow the
steps on your screen
Fig. 8.4.3 Fig. 8.4.4
Fig. 8.4.1 Fig. 8.4.2