User Manual

34
24. Moving your Petcube to a different location or changing Wi-Fi settings
As long as the Petcube is within range
of your wireless network, you can
reposition it according to your needs.
However, if you’re trying to use it
in a different Wi-Fi environment
or want to connect the camera
to a different wireless network, you
need to change the Wi-Fi settings
in the Petcube app.
To do that:
1. Open the Petcube app
2. Go to the camera profile, tap
the ‘Settings’ wheel in the upper
right corner if you use Android
or tap the ‘Play’ icon if you use iOS
(fig 4.24.1)
3. Tap the ‘Settings’ wheel in the upper
right corner (fig 4.24.2)
4. Select ‘General’ (fig 4.24.3)
5. Tap ‘Change Wi-Fi’ (fig 4.24.4)
6. Power up your Petcube,
wait 1 minute until it starts up.
7. Find a reset pin that came with your
Petcube Bites, find the small hole
above the USB port on the left side
of the device, insert the reset pin
into it, hold it down for 3 seconds
until the light turns green and follow
the steps on your screen.
Fig. 4.24.1
Fig. 4.24.3
Fig. 4.24.2
Fig. 4.24.4