User Manual

2. Setting up your Petcube Bites camera on Android device

To set up your Petcube, please download the Petcube App to your Android

device. The Petcube App requires Android 4.3 or greater and can be downloaded

in the Google Play Store or at the link below:

www.petcu.be/android-app-download

Connect your Petcube to a power source and wait up to a minute until the LED

light starts pulsing green. Open Petcube App on your Android device, log in or

‘Home’ menu in the top left corner of the app, select ‘Add Camera’, and pick your

Petcube from the list of options. Keep in mind that you may be asked to turn on

Bluetooth.

When the LED light on the camera is pulsing green, hit Next. To identify the

device, press ‘Select’ below the image of Petcube and hit ‘Next’ again when the

LED starts pulsing green rapidly. Wait for the app to exchange data with the

Petcube and scan for available Wi-Fi networks, then select your home Wi-Fi

network from the list, put in your network password and hit ‘Join’. If you don’t

see your home network on the list or if you’re using a hidden network, connect

to your home Wi-Fi by entering the name of your network and password

manually and then hit ‘Join’ (keep in mind that it is case sensitive)

Once the LED light on your Petcube changes to solid white, you are ready to play

with your Petcube.

3. Playing with your Petcube Bites

If you successfully registered your Petcube Bites and the LED light on it glows

white, go to the ‘Home’ tab in the Petcube App and press the ‘Play’ icon at

the top. To fling treats, use the bone icon in the bottom right corner of the app

while in play mode, then hold down the bone icon in the middle of the screen