User Manual

GETTING STARTED

1. Setting up your Petcube Play camera on iOS device

To setup your Petcube, download Petcube application to your iOS device.

The Petcube app requires iOS 8.4 or greater and can be downloaded

in the App Store or at the link below:

www.petcu.be/ios-app-download

Connect your Petcube to a power source and wait up to a minute until the

LED light starts pulsing green. Open the Petcube app on your iOS device,

account. Go to the ‘Home’ tab, select ‘connect your device’ and pick your

Petcube from the list of options. Keep in mind that you may be asked

to turn on Bluetooth.

When the LED light on the camera is pulsing green, hit Next. To identify

the device, press ‘Select’ below the image of Petcube and hit ‘Next’ again

when the LED starts pulsing green rapidly. Wait for the app to exchange

data with the Petcube and scan for available Wi-Fi networks, then select

your home Wi-Fi network from the list, put in your network password and

hit ‘Join’. If you don’t see your home network on the list or if you’re using

a hidden network, connect to your home Wi-Fi by entering the name of your

network and password manually and then hit ‘Join’ (keep in mind that it is

case sensitive).

Once the LED light on your Petcube changes to solid white, you are ready

to play with your Petcube.