User Manual

22. Moving your Petcube Bites to a different location
As long as the Petcube Bites is within range of your wireless network, you can
reposition it according to your needs.
However, if you’re trying to use it in a different Wi-Fi environment or want to
connect the camera to a different wireless network, you need to change the Wi-Fi
settings in the Petcube App.
To do that, open the Petcube App, go to the ‘Home’ tab, select ‘Settings’, then
‘Wi-Fi’. Power up your Petcube Bites, wait 1 minute until it starts up, find a reset
pin that came with your Petcube, find the small hole below the USB port on
the left side of the Petcube Bites, insert the reset pin into it, hold it down for 3
seconds until the light turns green and follow the steps on your screen.
23. Changing Wi-Fi settings or connecting Petcube to a different network
If you need to either change the Wi-Fi settings on your Petcube Bites or connect
it to a different network, open the Petcube App, go to the ‘Home’ tab, select
‘Settings’, then ‘Wi-Fi’. Power up your Petcube Bites, wait 1 minute until it starts
up, find a reset pin that came with your Petcube, find the small hole below
the USB port on the left side of the Petcube Bites, insert the reset pin into it,
hold it down for 3 seconds until the light turns green and follow the steps
on your screen.
24. Turning your Petcube Bites off remotely
Currently, there is no option to turn off the camera remotely from the Petcube
App. But if you’re sharing access to it, you can disable it in the ‘Settings’ menu.
To disable sharing, go to the ‘Home’ tab, then tap the ‘Settings’ icon in the upper
right corner, and select ‘Sharing’. To disable sharing for friends, simply switch it
off. To stop public sharing, just tap ‘Stop sharing’. To disable family sharing, just
remove users from your family list by swiping their usernames to the left.