User's Manual

Mote Model 3
User Manual
19
Once you have confirmed the connection, you may remove the battery until it is time to install the
Mote on a machine. Then replace the plastic cap and place the Mote on the steel mount. Lastly,
place the steel S-ring over the top of the Mote and tighten clockwise at the base.
Success! Your Vibration Mote is now connected to WiFi!
RF exposure information:
To maintain compliance with FCC RF exposure requirements, use the product that maintain a
20cm separation distance between the user's body and the host.
MPE limit for RF exposure at prediction frequency is 1mW/cm2 for 2.4GHz WLAN/BT .
The MPE for 2.4GHz WLAN is 0.001mW/cm2, Bluetooth is 0.000mW/cm2 . It satisfy RF exposure
compliance.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized
modifications or changes to this equipment. Such modifications or changes could void the user’s
authority to operate the equipment.