User's Manual

Mote Model 3

User Manual

● iOS mobile device

● 3V CR123a batteries

● WiFi network access (see network requirements)

Pro Tip: Perform Blink Up in a low-light area

Indoors, away from any windows or ambient lights, best results in a shaded area (e.g. underneath

adesk)

Step 1: Log in to the Petasense App

1-1. Install the Petasense App

Using your iOS mobile device, install the Petasense App from the App Store.

1-2. Login using your email and password

If you have not set up a personal Petasense Login, contact your Petasense Account Admin to gain

access.

Step 2: Configure your WiFi credentials

2-1. Navigate to Blink Up

On the main dashboard page, select More from the bottom-right corner of the screen.

Then select Blink Up.

2-2. Enter your WiFi Credentials

Select Configure WiFi and enter the SSID and password of your WiFi network.

Then select Next.

Step 3: Power up the Vibration Mote

3-1. Access the battery compartment of the Mote

Unscrew the steel S-ring and slide it over the top of the Mote. Remove the Mote from the steel

mount and carefully pull off the plastic cover.

3-2. Insert the battery

Insert one 3V CR123a battery into the battery compartment.