Safety Data Sheets (SDS)

ManualsBrandsPETARMOR PLUS ManualsCat Flea & Tick CarePet Armor® Plus For Cats over 1.5 lbs

PetArmor Plus for Cats

Section 7. Handling and storage

Advice on general

occupational hygiene

Conditions for safe storage,

including any

incompatibilities

Eating, drinking and smoking should be prohibited in areas where this material is

handled, stored and processed. Workers should wash hands and face before eating,

drinking and smoking. See also Section 8 for additional information on hygiene

measures. Remove contaminated clothing and protective equipment before entering

eating areas.

Store in accordance with local regulations. Store in original container protected from

direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials

(see Section 10) and food and drink. Store locked up. Keep container tightly closed

and sealed until ready for use. Containers that have been opened must be carefully

resealed and kept upright to prevent leakage. Do not store in unlabeled containers.

Use appropriate containment to avoid environmental contamination. See Section 10 for

incompatible materials before handling or use.

Protective measures

Put on appropriate personal protective equipment (see Section 8). Avoid exposure -

obtain special instructions before use. Avoid exposure during pregnancy. Do not

handle until all safety precautions have been read and understood. Do not get in eyes

or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Avoid release to the

environment. If during normal use the material presents a respiratory hazard, use only

with adequate ventilation or wear appropriate respirator. Keep in the original container

or an approved alternative made from a compatible material, kept tightly closed when

not in use. Empty containers retain product residue and can be hazardous. Do not

reuse container.

Precautions for safe handling

2-(2-Ethoxyethoxy)ethanol

AIHA WEEL (United States, 7/2018).

TWA: 25 ppm 8 hours.

2,4-Dodecadienoic acid, 11-methoxy-3,7,11-trimethyl-, 1-methylethyl ester,

(2E,4E,7S)-

None.

Fipronil (ISO)

None.

Tert-butyl-4-methoxyphenol

None.

Section 8. Exposure controls/personal protection

Ingredient name

Exposure limits

Safety eyewear complying with an approved standard should be used when a risk

assessment indicates this is necessary to avoid exposure to liquid splashes, mists,

gases or dusts. If contact is possible, the following protection should be worn, unless

the assessment indicates a higher degree of protection: chemical splash goggles.

Eye/face protection

Environmental exposure

controls

Emissions from ventilation or work process equipment should be checked to ensure

they comply with the requirements of environmental protection legislation.

Appropriate engineering

controls

If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,

local exhaust ventilation or other engineering controls to keep worker exposure to

airborne contaminants below any recommended or statutory limits.

Wash hands, forearms and face thoroughly after handling chemical products, before

eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and safety

showers are close to the workstation location.

Hygiene measures

Control parameters

Individual protection measures

Occupational exposure limits

Skin protection

5/12

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)