MODEL #830070 sett 158 x6f. Configuration call our customer Configuration service department at 1-800-576-2367, p.m., EST, Monday Friday. 10f. x10ft.
PACKAGE CONTENTS PART lei Gate Panel 1 8 | Chain Link Panels 7 Latch is per-instalied and should not be moved. HARDWARE CONTENTS (shown actual size) @ O Pane! Clamps w/ bolt & hex nut Qty.
A safety FORMATION Please read and understand this entire manual before attempting fo assemble, operate or install the product. PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Note: Horizontal support bar should be located on the outside of the kennel once assembled.
ASSEMBLY INSTRUCTIONS x4 at 90°. Use the gate pane! {A) and another panel (B) to complete this side. Note: The gate panel (A) can be used In any 3. Treats anther corner by adding another pans! (B} position around the kennel. Hardware Used @ Panel Clamps T AT ERITREANS KIDDIE and sight clamps (AA) to complete kennel! 4. Continue by adding three more panels (B) construction. Tighten all clamps (AA).
WARRANTY ONE YEAR LIMITED WIRE KENNEL WARRANTY What is Covered The manufacturer warrants that the kennel will be free from defects in workmanship for a period of one (1) year. This warranty Is extended only to an original purchaser who Installed the product at a residence (not commercial premises) in the 50 United States. it is not transferable. if a defect exists, the manufacturer will, at its option, either repair or replace the product or the defective competent.
