For The ON-THE-GO Pet™ INSTRUCTION MANUAL JOGGER NO-ZIP PET STROLLER PG8400NZ/PG8450NV Interior Dimensions: 30"L x 13"W x 22"H To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.
PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Axle Front Wheel 2-Back Wheels Removable Waterproof Liner Back Tray Stroller UNFOLDING THE STROLLER Step 1. Release folding latch (A). tep 2. Spread handle (B) and seat S apart until the frame clicks and locks on both sides. Step 3. Ensure that the stroller is locked in on both sides before using. 2 JOGGER NO-ZIP PET STROLLER • PG8400NZ/8450NV B. A.
OPENING THE STROLLER Spread the canopy apart to the open position. Apply brake lever by pushing down with toe. Ensure brakes are applied when parking stroller. Release by lifting brake lever with toe. WARNING: Never leave your stroller parked without applying brakes. Canopy Back View of Stroller Step Here BACK WHEEL ASSEMBLY INSTRUCTIONS Push back wheels until they easily click into place. Shown with both back wheels in place.
BACK WHEEL ASSEMBLY INSTRUCTIONS To connect or release wheel from axle, squeeze pin in. Pin FRONT WHEEL ASSEMBLY INSTRUCTIONS Step 1. To attach front wheel, slide plastic wheel support up and into tubing. Step 2. Slide wheel up, until velco pins pop out of holes.
FRONT WHEEL ASSEMBLY INSTRUCTIONS Step 3. To use stroller in locked position for jogging, push pin in. Locked Position Step 4. To use stroller in swivel position, pull pin down, and to the right. Swivel Position TO SECURE COMPARTMENT TO FRAME Step 1. Open stroller and pull compartment down. Step 2. Clip onto frame.
TO SECURE LATCH Step 1. To close compartment, pull downward and clip the canopy into the front of the stroller until it locks. Step 2. To open the stroller canopy, simply push and release button to unlock. TO SECURE SIDE FLAP To help secure compartment, Velcro flap around tube and fasten to the bottom of the compartment.
FOLDING THE STROLLER Step 1. NOTE: Before folding the stroller, unclip steel latch, and open the canopy. C. Step 2. Slide second frame lock release (C) to the right, while squeezing the main frame lock release (D) rotate the folding mechanism almost 180 degrees forward until stroller releases and handle is lowered. SLIDE TO RIGHT C. D. SLIDE TO RIGHT AND ROTATE 180 DEGREES FORWARD WHILE SQUEEZING MAIN FRAME (D) LOCK RELEASE TO ASSEMBLE BACK TRAY Step 1.
LOOKING AFTER YOUR STROLLER • • • • • Always store product in a clean, dry place. Not recommended for use on the beach. Do not put heavy items on top of the stroller. Clean frame by wiping with a lightly oiled cloth. Do not use detergent or abrasives. Spot clean fabric with dry cleaning fluid or mild soap and warm water. • To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, and swivels), keep all moving parts clean and lubricated with WD40® or light machine oil.
WARNING! FOR PETS ONLY. Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death.
