Use And Care Manual

I-GO2 SPORT • PG1210

Step 1. Push down on Reinforcement Board,

insideoftheIGO2Sport,untilitisat,asshown

in Figure A.

To attach carrying strap, clip each end of the carrying

strap to the two plastic rings, located near the top of

the I-GO2, shown in Figure C.

Step 2. Lift up the hook & loop fastener strips,

so they are above the Reinforcement Board as

shown in Figure A.

You will need the hook & loop fastener strips to

attach Fleece-Top Comfort Liner. See Step 3.

Step 3. Place Fleece-Top Comfort Liner inside

the I-GO2 Sport and fasten into place, using the

two hook & loop fastener strips. See Figure B.

ASSEMBLY

TO ATTACH CARRY STRAP