Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
PAGE 138 OF 176
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
DEVICE OPERATION: CONFIGURING PTT SETTINGS
1
Ensure that your PTT device is connected and channel settings have been configured proper-
ly and as desired.
2
Press and hold the PTT button on the PTT device.
3
Wait to hear a single beep.
4
Talk.
5
Release the PTT button when you are finished talking.
▶ You may talk or listen, but you may not do both simultaneously.
▶ Transmissions from an individual user are broadcast to all other users on the network using the
same channel.
▶ Only one person may talk on a channel at one time. If you try to PTT while another user is trans-
mitting, you will hear a busy signal.
▶ Selected Channel audio will interrupt Monitored Channel audio.
▶ Flash Override audio will interrupt both Selected Channel and Monitored Channel audio.