Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 131 OF 176
DEVICE OPERATION: CONFIGURING PTT SETTINGS
Set Earpiece Volume
1
Next to Volume, check the Network De-
fault box to use the Network Default ear-
piece volume.
Enable Push-to-Talk
1
In the Run PTT Subsystem drop-down
menu, select Enabled.
2
To disable Push-to-Talk, select Disabled.
2
To customize earpiece volume, uncheck
the Network Default box.
3
In the Volume field, enter a value 0 - 125.
Values above 100 are digitally amplified.