Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 101 OF 176
Configure Video Output IP Address and Port
DEVICE OPERATION: CONFIGURING VIDEO SETTINGS
1
Enter an IP address for the video in the Video Output IP field. Pick a unique IP address.
Uncheck the Factory Default box to make changes to this field. Check the Factory Default
box to use the Factory Default Video Output IP.
2
Enter a port for the video stream in the Video Output Port field. Uncheck the Factory De-
fault box to make changes to this field. Check the Factory Default box to use the Factory
Default Video Output Port.