Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 99 OF 176
DEVICE OPERATION: CONFIGURING VIDEO SETTINGS
Check Camera Input Status
Overall Input Status: displays Yes if a camera is connect-
ed; displays No otherwise.
Scan Mode: scan mode setting of the connected camera,
if available
Video Data Format: output format setting of the con-
nected camera, if available
Input Resolution: resolution setting of the connected
camera, if available
Input Frames/Sec: frame rate setting of the connected
camera, if available
Audio Present: audio status from the connected camera,
if available
1
The left column displays status information for the camera connected to the MPU5. Use this
status information to verify that the connected camera is configured and working properly.