Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
PAGE 94 OF 176
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
Zeroize the Security Key
1
Pull down the zeroize latch on the top of the unit.
2
With the zeroize latch held down, twist the Power Knob counterclockwise from the OFF
position to the Z position.
Note: the status indicator LED will blink red once when the key is zeroized.
Part V: Device Operation
DEVICE OPERATION: ZEROIZE THE SECURITY KEY