Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 159 OF 176
Minimum Safe Distance (MSD)
Antenna Gain (dBi)
*Occupational Expo-
sure Distance (cm)
Non Occupational Ex-
posure Distance (cm)
Dipole (Omnidirec-
tional)
2.1 7.0 20.0
3.5 7.0 20.0
4.0 8.0 20.0
7.4 **11.0 **25
8.5 10 24
In addressing the MSD for operation of the RF-2100 S-Band (2200 MHz – 2500 MHz) RF module with IC ID 20968-RF2100, the
RF-5100 Upper C-Band (5100 MHz – 6000 MHz) RF module with IC ID 20968-RF5100, and the RF-2150 10W S-Band (2200 MHz –
2500 MHz) radio with IC ID 20968-RF2150, the applicable Maximum Permissible Exposure (MPE) limits were obtained IAW the IC
rules for radio frequency radiation exposure limits under Industrial Canada RSS-102, Section 2.6 .
En abordant la MSD pour le fonctionnement des RF-2100 S-Band (2200 MHz - 2500 MHz) radio avec IC ID 20968-RF2100, et
RF-5100 Upper C-Band (5100 MHz – 6000 MHz) radio avec IC ID 20968-RF5100, et RF-2150 10W S-Band (2200 MHz - 2500 MHz)
radio avec IC ID 20968-RF2150, l’exposition maximale admissible applicable (MPE) limites ont été obtenus conformément à la IC
règles pour les limites d’exposition aux radiations de fréquences radio sous industriel Canada RSS-102, Section 2.6.
For compliance information, contact Persistent Systems’ Quality Management Department.
Pour plus d’informations de conformité, le service de qualité contact Persistent Systems.
(212)-561-5895
[e-mail]
PROFESSIONAL INSTALLER – COMPLIANCE