Operator's Manual

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 21 OF 176
PHYSICAL SETUP: RF SETUP
4
Tighten screws clockwise in diagonal
order with a #1 Phillips Head screwdriver
until they stop (min. 4 in-lbs. of torque)
5
Pull on the RF module to verify that it is
attached securely. Ensure there are no gaps
in between the RF module and the MPU5
chassis.
1
2
3
4