Spec Sheet

ManualsBrandsPerrin and Rowe ManualsFaucet AccessoriesU.1106 11.75" Hot Water Filtration System

www.rohlhome.com

Perrin & Rowe® Kitchen Filtered Hot Water Dispensers

COLORS/FINISHES WARRANTY

• Limited Lifetime

Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

FEATURES

• High quality lter cartridge removes chemicals, bacteria

and other contaminates.

• Sanitary, quick change lter cartridge makes

replacement easy

• Order U.PRF1 for hot water replacement lter cartridge

every 6 months

• Hot Water Filter

HOT WATER INLINE FILTER WITH CARTRIDGE

U.1106

TO HOT TANK

INLET FROM FAUCET

Ø2"

* PLEASE ALLOW 12 1/2”

(MINIMUM) TO

ALLOW FOR FILTER

REPLACEMENT.

11 3/4”

Summary of content (3 pages)

PAGE 1
www.rohlhome.com HOT WATER INLINE FILTER WITH CARTRIDGE Perrin & Rowe® Kitchen Filtered Hot Water Dispensers U.1106 FEATURES COLORS/FINISHES WARRANTY • High quality filter cartridge removes chemicals, bacteria • Hot Water Filter • Limited Lifetime and other contaminates. • Sanitary, quick change filter cartridge makes replacement easy • Order U.
PAGE 2
www.rohlhome.com INSTALLATION INSTRUCTIONS • Instant Hot Tap • ® • CARTRIDGE REPLACMENT The filter cartridge in your instant hot tap system needs to be changed every six months in order to ensure the system works at its optimum performance. Changing the filter cartridge is a simple matter: 1. Switch off the heater tank either at the mains or by pressing the centre button on the heater tank touch screen. ***Important Notice*** – run off all hot water until just cold water is coming out of the tap. 2.
PAGE 3
www.rohlhome.com INSTALLATION INSTRUCTIONS • Instant Hot Tap • ® • Filter Installation 1. Fixing Mounting Bracket IT IS VERY IMPORTANT THAT BEFORE YOU START INSTALLING THIS FILTER SYSTEM YOU ENSURE YOU HAVE READ THE INSTALL GUIDES THAT CAME WITH THE TAP AND THE HEATER TANK. First you will need to remove the filter sump. This can be done by turning the sump a quarter turn anti-clockwise and pulling down.