Specification Sheet

Technical Data Sheet Clear RTV Silicone Adhesive Sealant
Permatex, PowerBead and Fast Orange are trademarks of Permatex, Inc. © 2002 All rights reserved
For Cleanup
1. Remove uncured product from parts and hand-tools
with Permatex
®
Envirosafe
®
ODC Free
Cleaner/Degreaser. If skinned over, break film with a
dry cloth to remove as much as possible. Remove the
remaining material with Permatex
®
Gasket Remover.
2.
Clean hands with a dry cloth or Permatex

Fast
Orange

hand cleaner.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Acetoxy silicone rubber
Appearance Clear, non-sag paste
Odor Mild acetic
Specific Gravity 1.01
Extrusion rate @ 25
_
C, (grams/min) >220
Flash Point
_
C,
_
F >93 (>200)
TYPICAL CURING PERFORMANCE
Permatex

Clear RTV Silicone Adhesive Sealant cures on
exposure to moisture in the air. The product cures tack free in
1 hour and fully cures in 24 hours. Cure times will vary with
temperature, humidity and gap. Note: The curing process can
cause corrosion to some surfaces, for critical applications use
the Ultra Series silicones.
PERFORMANCE OF CURED MATERIAL
After 7 days at 25°C (77
_
F), 50% Relative Humidity
Typical Values
Hardness (Shore A) >20
*Elongation, % >350
**Tensile Strength, N/mm
2
(psi) >1.5 (>218)
*Material will stretch
3.5 times its original length before breaking.
**Amount of force required to break material.
TYPICAL ENVIRONMENTAL RESISTANCE
Temperature Resistance
Typical Values
Continuous, °C (°F) -59 to 204 (-75 to 400)
Intermittent, °C (°F) -59 to 260 (-75 to 500)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
80050 (66BR) 3 oz. tube, carded
80855 (66C) 11 oz. cartridge
81856 (66LA) 4.5 oz. automatic tube
81913 7.25 oz. automatic tube
85913 7.25 oz. PowerBead
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.